Evco EPU2BXP1S1 Manuel d'utilisateur télécharger pdf (Page 5)

EVCO S.p.A. c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104

EVCO

page 5 of 68

1. GENERALITIES

1.1 Description

The application is dedicated to the control and regulation of the Air Handling Units with cross flow recovery heat

exchanger. There are two solutions available:

• COMPACT Control: Responds to minimum requirements and the Standards.

• COMPLETE Control: Integrates the heating and high recovery efficiency functions to the Base solution.

The solution makes use of the large modularity of the c-pro 3 micro SAVE/c-pro 3 kilo SAVE

The c-pro 3 micro SAVE/c-pro 3 kilo SAVE controller has the following I/O:

• Digital outputs: 9

• Digital inputs: 9

• Analogical inputs: 9

• Analogical outputs: 6

Both instruments are equipped with CAN field port and a second RS485 serial interface (Modbus) allows connection to

BMS or EVCO (RICS) supervision systems.

The main control functions managed by the “Complete” solution are:

- Supply fan management

- Return fan management

- Management of the cross flow recovery heat exchanger by-pass damper

- Outside air damper management

- Management damper mixing room

- Management of hot water coil for heating (or a group of 3 electric heaters)

- Management of time bands with ECONOMY and COMFORT working mode

- CO

probe management for fan control

- Alarms log

- User Menu split in three main levels (User, Installer, Manufacturer), each protected by a different password.

- Multilanguage user menu (English, Italian, French)

1 2 3 4 5 6 7 8 9 10 ... 67 68

Pas de commentaire

Evco EPU2BXP1S1 Manuel d'utilisateur Page 5